PHILIPS MASTER TL-D secura 58W / 840 has been specially developed for areas where lamp breakage can cause damage to products or processes, such as in the food industry, warehouses, health care, pharmaceutical industry, gyms, warehouses. These secura lamps are therefore splinter free.
The lamp is completely covered with a protective plastic layer and is recognizable by the blue rings on the lamp end. The PHILIPS MASTER TL-D secura with G13 socket is applicable to conventional and high-frequency electronic control gear.
PHILIPS MASTER TL-D secura is also available as Philips Master TL-D Food secura, which is especially for meat showcases. Below are the Non food variants with the office and workplace 'colors'. This fluorescent lamp is dimmable / adjustable on the correct ballast. It is possibly interchangeable with the other Super 80 lamps. The Master TL-D Food secura is not suitable for closed luminaires.
Available in lamp colors 830 (white) and 840 (bright white). Wattages 18W, 36W and 58W. The color rendering (Ra)> 85.
The lifetime of the PHILIPS MASTER TL-D secura 58W / 840 is 1.5 times longer than the standard color TL-D and the light output is 30% higher with the same energy. Also during this time the light intensity remains higher as the standard fluorescent lamp. The Philips TL-D has a 50% failure rate of 20,000 hours on HF ballast equipment (12,000 hours with standard ballast) This PHILIPS TL-D lamp with G13 lamp base is dimmable with a suitable ballast.
Defective PHILIPS MASTER TL-D secura 58W / 840 lamp is easy to recognize due to the black breakdown in the lamp at the end on one side! If this is the case on two sides, the ballast is often broken. Usually the lamp slowly starts to give less light from 10,000 to 12,000 hours. May be wise to replace in time due to the risk of failure of the electronic ballast. Due to wear and tear of the lamp, it will consume more power which will charge the VSA.
Lamp base information PHILIPS MASTER TL-D secura 58W / 840
|lamp base G13||lamp holder G13|
Changing PHILIPS MASTER TL-D secura 58W / 840 with 2 pins on each side can be done by turning the socket 90 degrees to the left or right, with a gentle rotational movement. De-energisation of the luminaire is necessary to make the lamp light, but also safer.
|Energy Efficiency Label (EEL):||A|
|Color rendering (Ra):||-|
|Luminous flux (lumens):|
|Lm / W:|
|Lamp Current (mA):||-|
|EM Luminance (cd / cm2):||-|
|Product Barcode (EAN):|
|Barcode outside box:|
|Packing outer box (number):||-|
|Design temperature (C):||-|
|Splinter free (HACCP):||no|
|AC input voltage (V):|