Philips HID-PV C 50 / I CDM 220-240V

General Information Lamp Type CDM
Number of Lamps 1 piece / unit
Suitable For Outdoor Use No.
Number of Products on MCB (16A Type B) (Nom) 24
Automatic Restart Yes
Operating and Electrical
Input Voltage 220 to 240 V
Input Frequency 50 to 60 Hz
Operating Frequency (Nom) 0.14 kHz
Power Factor 100% Load (Nom) 0.95
Ignition Voltage (Max) 4.0 kV
Ignition Switch-Off Time (Nom) 18 min
Mains Voltage Performance (AC) -10% - + 6%
Mains Voltage Safety (AC) -18% - + 10%
Earth Leakage Current (Max) 0.25 mA
Inrush Current Width 0.25 ms
Constant Wattage Deviation -3% / + 3%
Power Losses (Nom) 6 W.
Inrush Current Peak (Max) 26 A.
Wiring Cable Capacity Output Wires Mutual (Nom) 150 pF
Cable Length From Device to Lamp 2.0 m
Wire Striplength 10.0-11.0mm
Ballast Contact Wire Cross Section 0.50-2.50 mm²
Connector Type Insert

System characteristics
Rated Ballast-Lamp Power 50 W.
TemperatureT-Ambient (Max) 50 ° C
T-Ambient (Min) -20 ° C
T-Storage (Max) 75 ° C
T-Storage (Min) -25 ° C
T-Case Lifetime (Nom) 75 ° C
T-Case Maximum (Max) 75 ° C

Mechanical and Housing
Housing / I
Approval and Application IP Classification 20
Active Temperature Protection Yes
EMI 9 kHz ... 300 MHz
CISPR 15 ed 7.2
Safety Standard
IEC 61347-2-3
Quality Standard
ISO 9000: 2000
Environmental Standard
ISO 14001
Harmonic Current Emission Standard
IEC 61000-3-2
EMC Immunity Standard
IEC 61547
Vibration Standard
IEC68-2-6 F c
Bumps Standard
IEC 68-2-29 Eb
Humidity Standard
IEC 928-13
Approval Marks
CE marking
Material No. (12NC) 913700665166
Net Weight (Piece)
0.360 kg